Korg Initialize Procedure / Procédure d'initialisation Korg

Parfois une machine crashe, se bloque, ne répond plus. Angoisse. Voici la liste de la procédure de REINITIALISATION pour a peu près tous les produits Korg. Ceci permet de redémarrer la machine, mais attention, toutes vos données personnelles seront aussi perdues : pensez à faire des back-up réguliers !

Sometimes a machine crashes. it does not start anymore, or stay stunked. Panic. Here is the listing of the reinitialize process for all Korg products. This will allows you to make it running again, but be advised that every personnal data will be lost! Make backups of your files on a regular basis !

Print this page for future reference !  imprimez cette page pour plus tard !

Keyboards and Modules

Rom#

SQ8 2.2

DSS1 36

SQD8 3.0

Poly 800 M2 006 on chip

DFP1 803 on chip

SQD1 609 on chip

--------------------------------------------------------------------------------------------------------------------

DDD-1

Initialize

Powerup holding YES and NO / allumez en tenant appuyés Yes et No

--------------------------------------------------------------------------------------------------------------------

DS-8 / 707

Factory Data / Données d'usine

From RAM card of SYSEX (Atari Factory disk) /  de la carte RAM de SYSEX  ( disquette d'usine Atari)

Initialize

Hold Up and Down ad powerup / allumez en tenant appuyés Up etDown

ROM# :DS-8= #218, 707= #905

Hold 3 and 4 and powerup / allumez en tenant appuyés 3 et 4

--------------------------------------------------------------------------------------------------------------------

M1 (CR2032 Battery)

Factory Data

No ROM load

From card

Initialize

Hold INT and Card and Combi and powerup  / allumez en tenant appuyés INT et Card et Combi

ROM# :29

Hold INT and powerup /allumez en tenant appuyé  INT

--------------------------------------------------------------------------------------------------------------------

M1R

Factory Data

No ROM load

Initialize

Hold INT and Combi and Prog and powerup  /allumez en tenant appuyés INT  et Combi et Prog

ROM# :17

Hold Int and powerup /  allumez en tenant appuyé  INT

--------------------------------------------------------------------------------------------------------------------

M3R

Factory Data

Page 5D of Global mode / Page 5D du mode Global

ROM# :16

Hold Edit and Global and powerup / allumez en tenant appuyé  Edit et Global

Battery: CR20322(no solder)

--------------------------------------------------------------------------------------------------------------------

T Series

Factory Data / Données d'usine

Load from Factory disk / depuis la disquette d'usine fournie

Initialize

Hold 0 of lower keypad and Prog A and power-up then Immediately Turn Off

Allumer en tenant appuyés le zéro (0) du keypad le plus bas et Prog A et ré-éteignez immédiatement

ROM# :T-Series 28

Hold 0 of lower keypad and powerup /Allumer en tenant appuyés le zéro (0) du keypad le plus bas

--------------------------------------------------------------------------------------------------------------------

Wavestation / EX / AD

Most recent ROM

Wavestation 3.19

Wavestation EX 3.19

Wavestation A/D 1.25

Factory Data

From RAM card or SYSEX (Atari factory disk) / de la carte RAM de SYSEX  ( disquette d'usine Atari)

INITIALIZE:

1. Power Up / While KORG is flashing, Hold 4 & 'V' continuously until the 'Special Screen' appears. / Allumez : pendant que KORG  clignote, tenir appuyés 4 et V sans arret jusqu'a ce que l'ecran "Special Screen" apparaisse

2. Press INIT RAM / appuyez INIT RAM

3. Press CONT / appuyez CONT

(RAM is initialized and ROM is loaded into both RAM 1 & 2)

(la RAM est initialisée et la ROM chargée en RAM 1 ET 2)

IMPORTANT: DO NOT PRESS ANY OTHER COMMANDS

IMPORTANT N APPUYEZ SUR AUCUNE AUTRE TOUCHE-COMMANDE

 

ROM #: 3.19 (AD: #1.25)

1. Power Up / While KORG is flashing, Hold 4 & 'V' continuously until the 'Special Screen' appears./ / Allumez : pendant que KORG  clignote, tenir appuyés 4 et V sans arret jusqu'a ce que l'ecran "Special Screen" apparaisse

2. Press CONT (IMPORTANT: DO NOT PRESS ANY OTHER COMMANDS) / appuyez sur CONT

IMPORTANT: do not press any other commands / MPORTANT N APPUYEZ SUR AUCUNE AUTRE TOUCHE-COMMANDE

--------------------------------------------------------------------------------------------------------------------

Wavestation SR

Factory Data

No ROM load

ROM# :1.15

Hold Cursor/Bank/Edit/Yes while unit is powered on / allumez en tenant appuyés Cursor/Bank/Edit/Yes

January 18/93: #1.15

-----------------------------------------------------------------------------------------------------------------------

01/W & 01/Wfd

FACTORY DATA:

Page 7 of GLOBAL Mode. / page 7 du mode Global

INITIALIZE

Hold RESET & COMPARE and Power Up / allumez en tenant appuyés RESET & COMPARE

ROM #: 64

Hold: RESET / Power Up  / allumez en tenant appuyé RESET

--------------------------------------------------------------------------------------------------------------------

03R/W

FACTORY DATA:

Page 05C of GLOBAL mode. / page 05C du mode Global

ROM #:13

Hold: +1 and -1 and TURN ON / allumez en tenant appuyés +1 et -1

Feb 7/93: #13

--------------------------------------------------------------------------------------------------------------------

X-3 & X-3R

FACTORY DATA: données d'usine

Load from Factory disk./ chargez avec la disquette d'usine fournie

INITIALIZE

Hold: ENTER & Cursor DOWN and TURN ON / allumez en tenant appuyés ENTER & Cursor DOWN

ROM #:44 (X-2: #46)

Hold: 7 & ENTER / Power Up / allumez en tenant appuyés ENTER et 7

--------------------------------------------------------------------------------------------------------------------

X5/X5D/X5DR/O5RW

Init: Hold "+1" and "-1" while turning on. Once unit is on, let go. / allumez en tenant appuyés  +1  et -1

Preload: Perform preload on global screen 5. / sons d'usine sur l'écran Global page 5

--------------------------------------------------------------------------------------------------------------------

N364/N264

Check ROM: Hold "Enter and 7" while powering on.

Init: Hold "Enter and 7" while powering on.

Preload: Load preload disk "NFD-00P"

Testmode-ENTER-8

--------------------------------------------------------------------------------------------------------------------

N1/N5/N5EX/N1r

Check ROM: Hold "Enter" and "1" while powering on.

Init: None

Preload: Press "Utility", Select "Factory Preload" and press

"Enter" twice.

--------------------------------------------------------------------------------------------------------------------

NS5R/NX5r

Check ROM: Hold "Part <" and "Param <" while powering on.

Init: None

Preload: Press "Enter", select "Utility". Then press "Enter" twice more.

Select "Factory Preset" and press "Enter". Select "yes" and Press "Enter" once more.

--------------------------------------------------------------------------------------------------------------------

Trinity

Check ROM: Turn on, look at screen (o.s. 3.1.2 all models, 2.4.1 for Solo)

Init: Hold "Enter" and "0" while powering on.

Preload: Load preload disk "TFD-00P"

--------------------------------------------------------------------------------------------------------------------

TR-Rack

Check ROM: Hold "Edit" and ">" while powering on, o.s 1.0.4

Init: Hold "Edit" and "A4" while powering on.

Preload: Global mode screen 10

--------------------------------------------------------------------------------------------------------------------

Prophecy

Check ROM: Hold "Wheel 3" button while powering on.

Init: None

Preload: Shut off protects on Global screen 20, Preload "All_Data" on Global screen 19

--------------------------------------------------------------------------------------------------------------------

Z1/Z1EX

Check ROM: Hold Enter and 8 while powering on.

Init: Hold SW1 and SW2 while powering on.

Preload: Enter Global Mode, Screen: "Global Data Utility".

Select "Factory" and press Enter twice"

--------------------------------------------------------------------------------------------------------------------

SG-ProX

Check ROM: Hold "Program" and "Piano 1" while powering on.

Init: Hold "Program" and "Piano 1" while powering on.

Preload: Turn off protects for program and performance in Global mode screens 12 and 13, then perform preload on Global mode screen 14.

(Service Note: if problem symptom is Damper pedal controld Modulation Wheel fucntion…reason is mod wheel harness came unpluged from PCB)

--------------------------------------------------------------------------------------------------------------------

SG-Rack

Check ROM: Hold "Edit" and "A4" while powering on.

Init: Hold "Edit" and "A4" while powering on.

Preload: Turn off protects for program and performance in Global mode screen 6, then perform preload on Global mode screen 7

--------------------------------------------------------------------------------------------------------------------

Triton, Triton Rack and Karma

Check O.S On Screen

Init: Enter and 0 while powering up

Preload: On disk supplied

O.S Triton 2.1.0, Triton Rack 1.1.0, Karma 1.0.2

--------------------------------------------------------------------------------------------------------------------

MS2000(R)

Check O.S. Power on while holding 5 and Mod Sequence ON/OFF

Current o.s. 1.0.5

Load O.S PC installer program, need MIDI interface and cables.

Turn on MS2000 while holding WRITE and TYPE

PreLoad In Global

--------------------------------------------------------------------------------------------------------------------

i-Series

I-1

FACTORY DATA

Load from Factory disk.

INITIALIZE

Hold: PROGRAM & DISK and TURN ON

ROM VERSION: Hold EDIT STYLE and Power UP

Check ROM: Hold "Arr. Play" and "Global" powering on.

Init: Hold "Arr. Play" and "Global" powering on.

Preload: Load preload disk "IFD-01P"

--------------------------------------------------------------------------------------------------------------------

I-2 & I-3

FACTORY DATA:

Load from Factory disk.

INITIALIZE:

Hold: ARR PLAY and EDIT STYLE and TURN ON

ROM #:25 (#58 with upgrade)

Hold: EDIT STYLE & EDIT PROGRAM and TURN ON

Product: iX300, i2, i3

Check ROM: Hold "Arr. Play" and "Global" powering on.

Init: Hold "Arr. Play" and "Global" powering on.

Preload: Load preload disk "IFD-00P"

--------------------------------------------------------------------------------------------------------------------

i4s

Check ROM: Hold "Arr. Play" and "Program" powering on.

Init: Hold "Arr. Play" and "Program" powering on.

Preload: Load preload disk "IFD-00P"

--------------------------------------------------------------------------------------------------------------------

i5S/I5M

Check ROM: Hold "Arr. Play" and "Global" while powering on.

Init: Hold "Arr. Play" and "Global" while powering on.

Preload: Load preload disk "IFD-00P"

--------------------------------------------------------------------------------------------------------------------

i30

Check ROM: Turn on, look at top left side of screen (If version is 1.0

no number will appear.)

Init: Hold "Arrange Play" and "Global" while powering on.

Preload: Load preload disk "i30FD-00P"

--------------------------------------------------------------------------------------------------------------------

iS40/50/i40M

Check ROM: Hold "Arr. Play" and "Global" powering on.

Init: Hold "Arr. Play" and "Global" powering on.

Preload: Load preload disk "FDD-1004"

--------------------------------------------------------------------------------------------------------------------

Pa80

Check O.S On start-up screen, currently version 2.0

Preload Go to Disk Mode, Utilities, Restore Data. Make preload data from five files available from the Pa80 site.

--------------------------------------------------------------------------------------------------------------------

IH

Initialize

POWERUP W/ Detune & Bass

--------------------------------------------------------------------------------------------------------------------

C-Series

C-505

INITIALIZE

MIDI/TRANSPOSE & SPLIT and RESTART UNIT

--------------------------------------------------------------------------------------------------------------------

Effect Processors

A1

Factory Data

ROM card included in original packaging

Initialize

Hold Write and -1 and powerup

ROM# :A1 #18 on chip or 901718

Hold Write and powerup

--------------------------------------------------------------------------------------------------------------------

A3 / A2

Factory Data

Initialize

1. Hold Down arrow and Up arrow and powerup

2. Press "E" (Yes)

ROM#: A3=881012,A2=90316

1. Hold Utility and Up arrow and A and powerup

2. While screen displays "How do you do?" press F

3. Press A to change M/R to M/S

4. Press D to change D/R to D/S

5. Press F (Exit)

6. Press Utility then F (Version No. shown very briefly

7. Press F (Exit)

--------------------------------------------------------------------------------------------------------------------

A-4

INITIALIZE

Hold "WRITE" & "BYPASS" and Power On

--------------------------------------------------------------------------------------------------------------------

PX1

Check ROM: None

Init: None

Preload: Hold down "Metronome" and "Enter" buttons while powering on, then let go and press "+" button.

--------------------------------------------------------------------------------------------------------------------

PX2

Check ROM: None

Init: None

Preload: Hold down "Rhythm" and "Enter" buttons while powering on, then let go and press "+" button.

--------------------------------------------------------------------------------------------------------------------

AX1G/B

Check ROM: None

Init: None

Preload: Hold down "Value +" and "Page >" buttons while powering on, then let go and press "Value +" again.

--------------------------------------------------------------------------------------------------------------------

AX30B/G, AX300B/G

Check ROM: None

Init: None

Preload: Hold "Param/Value" and "Compare/Write" while powering on, then let go and press "Compare/Write" again.

--------------------------------------------------------------------------------------------------------------------

G1/2/3/4/5

Check ROM: None

Init: None

Preload: Hold down the Bank Pedal and "Compare/Write" buttons

while powering up, then let go and press "Compare/Write" again.

--------------------------------------------------------------------------------------------------------------------

411FX, 104DS, 105OD, 301DL

Check ROM: None

Init: None

Preload: Hold down the Program button while powering up, then

Let go and press again.

--------------------------------------------------------------------------------------------------------------------

DL8000-R

Check ROM: Hold "ms/d" and "HOLD" while powering up.

Init: Hold "ms/d" and "HOLD" while powering up.

Preload: Hold "ms/d" and "HOLD" while powering up. Wait

for "EEP Testing" to come up on the screen, then shut unit off and power back on.

--------------------------------------------------------------------------------------------------------------------

AM8000-R

Check ROM: Hold "FX1" and "FX2" while powering up.

Init: Hold "FX1" and "FX2" while powering up.

Preload: Hold "FX1" and "FX2" while powering up. Wait

for "EEP Testing" to come up on the screen, then shut unit off and power back on.

--------------------------------------------------------------------------------------------------------------------

 

Digital Recording Devices

D8

Check ROM: Hold "Metronome" and "Record Select" button # "6" while powering on the unit.

Init: None

Preload: None

--------------------------------------------------------------------------------------------------------------------

168RC

INITIALIZE:

Left knob under screen and + and -

--------------------------------------------------------------------------------------------------------------------

D12/D16/D1600

Check O.S On Start-up Screen

O.S. update Loaded from external media, go to system, choose external drive letter, choose option load system

O.S. D16 2.0.1, D1600

--------------------------------------------------------------------------------------------------------------------

Dance Tools

KAOSS PAD

INIT

HOLD + FX ON/OFF + 3 + POWER ON

After "L" is indicated, press 1->3->5->1->3->5 in order

--------------------------------------------------------------------------------------------------------------------

Electribe A & R

 How to start and operate the test mode

+TAP+PowerON  Start the test mode

 ITEM UP

 ITEM DOWN

16 STEP UP

15 STEP DOWN

How to reset the system

TRANSPOSE+WRITE & PLAY  EA-1 PRELOAD

SOLO+WRITE & PLAY  ER-1 PRELOAD

Electribe-S

Must have a Smart Media Reader/Writer and a Smart Media card to do a product upgrade. Copy o.s to smart media card. Put Smart Media card into ES1 and power on holding SAMPLE and GLOBAL. When the display indicates end, power down.

Check O.S. Power on holding RECORD and STOP, current o.s. 1.04

--------------------------------------------------------------------------------------------------------------------

Other:

Johnson Millennium Amplifier

INITIALIZE

Powerup W/CONFIG button

* onscreen

Let go

Push MOD

V1.05 most recent

--------------------------------------------------------------------------------------------------------------------

Johnson JM-60

Hold “american model” button

Powerup

Keep holding until LED has 2 lines

Then hold “british model” button

Until PR on screen

Let go

--------------------------------------------------------------------------------------------------------------------

JMP-1

Check ROM: None

Init: None

Preload: Hold "OD1" and "Clean1" while powering up.

--------------------------------------------------------------------------------------------------------------------

JFX1

Check ROM: None

Init: None

Preload: Hold down arrow button and "Store" while powering on.

--------------------------------------------------------------------------------------------------------------------

S3

Poweron w/ STOP + S1

TO RETURN TO THE SITE CLOSE THIS WINDOWS
POUR REVENIR AU SITE FERMEZ CETTE FENETRE

top of the page / haut de page