SCOPE /SP, SCOPE /DP
FAQ

Hardware Specifications

Solution

SCOPE DSP Board

Description

15 SHARC DSPs @ 60 MHz
PCI busmaster with delay line services
32 bit audio bus architecture
5 independent S/TDM expansion busses with 720 channels
Modular sandwich I/O port
Sample rate 24 kHz - 400 kHz


Digital Input and Output

S/TDM SCOPE bus connector 144 Channels,
32 Bit @ 44,1kHz

SYNC Syncplate connector Wordclock In / Out
ADAT 9-Pin-Protocoll

Direct I/O Daughter Board connector Multifunktions I/O port


General

PCI Expansion card Rev. 2.2 compliant 33 MHz
(Slot busmaster capable)

Vendor-ID 14B5 hex, creamware

Power consumtion 15 W

Ambient operating temperatures 0 - 55C (Minimum, Maximum)

Physical dimensions 31.2 x 10.8 x 1.6 cm
(excluding bracket)

Version "Classic" 20

Samplerate 96 khz, 48 kHz, 44,1 kHz and 32 kHz (Master)
30 kHz - 100 kHz (S/PDIF, Wordclock - Slave)
38 kHz - 50 kHz (ADAT - Slave)

Number of Channels 20 Inputs and 20 Outputs
2 * ADAT, S/PDIF + analog / stereo

Analog Inputs
Unbalanced RCA
Input sensitivity - 10 dBV (nominal)
Maximum input level + 2 dBV (0 dBFS)
Input impedance 10 k Ohm


Analog Outputs
Unbalanced RCA
Output level -10 dBV (nominal)
Maximum output level + 2 dBV (0 dBFS)
Output impedance 300 Ohm


Digital Inputs and Outputs
ADAT 4 EIAJ fibre optical jacks 8 Channels , 24-Bit, 2 In, 2 Out
S/PDIF RCA Unbalanced, 75 Ohm
MIDI DIN-5-Pol In, Out, Through

Performance
Digital - Analog 24 bit / 128 x oversampling / 96 kHz
Frequency Response < +/- 0.15dB (20Hz - 20kHz)
Dynamic Range 110 dB (based upon technical data of converter)
THD+N > 100 dBA typ.
Channel Seperation 105 dB @ 997Hz

Analog - Digital 24 bit / 96 kHz
Frequency Response < +/- 0.05dB (20Hz - 20kHz)
Dynamic Range 100 dB (based upon technical data of converter)
THD+N > 95 dBA typ.
Channel Seperation > 102 dB @ 997Hz



Version PLUS

Samplerate 96 khz, 48 kHz, 44,1 kHz and 32 kHz (Master)
30 kHz - 100 kHz (AES/EBU, Wordclock - Slave)
38 kHz - 50 kHz (ADAT - Slave)

Number of Channels 20 Inputs and 20 Outputs
2 * ADAT, AES/EBU + analog / stereo

Analog Inputs
Balanced XLR
Input sensitivity + 4 dBu (nominal)
Maximum input level +20 dBu (0 dBFS)
Input impedance 20 k Ohm

Analog Outputs
Balanced XLR
Output level + 4 dBu (nominal)
Maximum output level + 20 dBu (0 dBFS)
Output impedance 600 Ohm

Digital Inputs and Outputs
ADAT 4 EIAJ fibre optical jacks 8 Channels , 24-Bit, 2 In, 2 Out
AES/EBU XLR Balanced, 110 Ohm, 96 kHz capable
MIDI DIN-5-Pol In, Out, Through


Performance


Digital - Analog 24 bit / 128 x oversampling / 96 kHz
Frequency Response < +/- 0.15dB (20Hz - 20kHz)
Dynamic Range 110 dB (based upon technical data of converter)
THD+N > 100 dBA typ.
Channel Seperation 105 dB @ 997Hz

Analog - Digital 24 bit / 96 kHz
Frequency Response < +/- 0.05dB (20Hz - 20kHz)
Dynamic Range 100 dB (based upon technical data of converter)
THD+N > 95 dBA typ.
Channel Seperation > 102 dB @ 997Hz



Version 24ADAT

Samplerate 96 khz, 48 kHz, 44,1 kHz and 32 kHz (Master)
38 kHz - 50 kHz (ADAT - Slave)

Number of Channels 24 Inputs and 24 Outputs
3 * ADAT

Digital Inputs and Outputs
ADAT EIAJ fibre optical jacks 8 Channels , 24-Bit, 3 In, 3 Out
MIDI 2 * DIN-5-Pol In, Out, Through (on slot bracket)



Version Z-Link

Samplerate 96 khz, 48 kHz, 44,1 kHz and 32 kHz (Master)
30 kHz - 100 kHz (S/PDIF, Wordclock - Slave)
38 kHz - 50 kHz (ADAT - Slave)

32 - 96 kHz (Z-Link)

Number of Channels 28 Inputs and 28 Outputs (including 16 channels via two optional Luna 2496 IO Box units)
1 * ADAT, 2 * Z-Link, S/PDIF + analog / stereo

Analog Inputs
Unbalanced RCA
Input sensitivity - 10 dBV (nominal)
Maximum input level + 2 dBV (0 dBFS)
Input impedance 10 k Ohm


Analog Outputs
Unbalanced RCA
Output level -10 dBV (nominal)
Maximum output level + 2 dBV (0 dBFS)
Output impedance 300 Ohm


Digital Inputs and Outputs
ADAT 4 EIAJ fibre optical jacks 8 Channels , 24-Bit, 2 In, 2 Out
S/PDIF RCA Unbalanced, 75 Ohm

Z-Link Standard 1394 components, own protocol
MIDI DIN-5-Pol In, Out, Through

Performance
Digital - Analog 24 bit / 128 x oversampling / 96 kHz
Frequency Response < +/- 0.15dB (20Hz - 20kHz)
Dynamic Range 110 dB (based upon technical data of converter)
THD+N > 100 dBA typ.
Channel Seperation 105 dB @ 997Hz

Analog - Digital 24 bit / 96 kHz
Frequency Response < +/- 0.05dB (20Hz - 20kHz)
Dynamic Range 100 dB (based upon technical data of converter)
THD+N > 95 dBA typ.
Channel Seperation > 102 dB @ 997Hz


Sync Plate

Description

Wordclock and ADAT-Timecode Synchronization
(selectable Master und Slave)
Mounts on PC chassis back panel (no slot used)
Samplerate 24 kHz - 400 kHz via BNC

Synchronisation

Wordclock 75 Ohm, BNC, Input and output

Timecode

ADAT* 9-Pin connector Input and output

General

Power consumption 0.1 W
Operating temperature 0 - 55C (Minimum, Maximum)
Dimensions 12.3 x 9.8 x 1.5 cm

Package Contents

SCOPE II Board with attached 24 I/O board
(Classic, Puls or 24 ADAT)
Sync Plate
STDM Connector
Cablewhip assembly (S/PDIF, AES/EBU or Midi)
Installation CD-ROM
Quickstart Guide
Akai Sample CD-ROM


CD Contents Installation program
Driver
Software
Manual (Adobe Acrobat)